Professional Training on
Utility and Plant Maintenance (UPM)
ইন্ডাস্ট্রি এখন কোন গতানুগতিক থিওরিটিক্যাল নলেজ চায় না, চায় একজন ইউটিলিটি এন্ড প্ল্যান্ট মেইন্টেন্যান্স প্রফেশনাল। যারা ইন্ডাস্ট্রিতে ইঞ্জিনিয়ারিং ইকুইপমেন্ট সিলেকশনে, ডাউন টাইম কমিয়ে মেশিনের ইফিসিয়েন্সি এবং প্রোডাক্টিভিটি বাড়াতে স্কিল্ড। আপনিও কি হতে চান সেই স্কিল্ড ইঞ্জিনিয়ারিং প্রফেশনাল?
মাত্র ১৪ টি ক্লাসে হয়ে উঠুন ইন্ডাস্ট্রি এক্সপার্ট ইঞ্জিনিয়ার
Online Live + Recorded ক্লাস
সার্টিফিকেট সহ
Industry Focused
ইন্ডাস্ট্রি যে স্কিল খুঁজে
Live + Recorded
মিস হলেও রিভিশন সম্ভব
Professional Certificate
কোর্স শেষে সার্টিফিকেট
Industry Expert Mentor
১৫ বছরের অভিজ্ঞ প্রফেশনাল
কোর্স কারিকুলাম
Utility & Plant Maintenance Course Outline
01
Industrial Electrical Fundamentals
- Basic Electrical Concepts: Power, Voltage, Current, Resistance etc.
- Understanding Ohm's & Kirchhoff's Laws in Home & Industry.
- AC & DC Fundamentals, Single & Three Phase Power Systems.
- Understanding BNBC, Electricity Act and Rules.
- Electrical Safety, Hazard and Risk Management.
02
Electrical Installation & Maintenance
- Understanding Cable, Cable Types & Selection.
- Voltage Drop Calculation.
- Electrical Equipment, Instrument & Device.
- VCB, ACB and Their Applications.
- Fuse, MCB, MCCB & MPCB.
- RCCB, RCB & ELCB.
03
Industrial Equipment & Motor Selection Procedure
- Understanding Motor and Its Classification.
- AC, DC Motor and Induction Motors.
- Synchronous and Asynchronous Motors.
- Flameproof and ATEX Motors.
- Motor Selection with 40 Industrial Points.
- Motor Power, Starting and Controlling Systems.
- Soft Starter & VFD Basics.
04
Factory Load Calculation & Electrical Design
- Single Line Diagram (SLD).
- Electrical Layout Diagram (ELD).
- Earthing, Grounding & Bonding.
- Industrial Load Calculation.
- Connected Load, Running Load and Demand Load Calculation.
- Short Circuit Calculation and Full Current Calculation.
- Cable and Circuit Breaker Calculation & Selection.
- Busbar Calculation and Selection Process.
- Power Generation, Transmission & Distribution.
05
Power Management, Substation Design & Selection
- HT & LT Panel Selection, MVD and LVD.
- Substation Equipment, Operation & Maintenance.
- Switchgear and Electrical Protection Systems.
- CT & PT, Protective Relays and Systems.
- Substation & Transformer.
- Protection and Testing Systems.
- Alternator and Generator, ATS System.
- Capacitor Bank, APFC and Grid Penalty.
- Understanding Electrical Faults at Substation.
- Documentation & Authorization for Substation.
06
Air Compressor: Selection, Operation & Maintenance
- Understanding Air Compressor.
- Types of Air Compressor.
- Parts of Air Compressor.
- Understanding Different Compressor Types.
- Requirements and Selection Procedure.
- Common Selection Errors and Technical Considerations.
- Efficiency and Power Optimization.
- Operation & Maintenance.
07
Water Treatment Plant (WTP): Selection, Operation & Maintenance
- Understanding Water Treatment Plant (WTP).
- WTP Fundamentals & Raw Water Analysis.
- Raw Water Sources & Characteristics.
- Important Water Quality Parameters.
- Water Quality Requirements & Testing for Different Industries.
- WTP Selection, Operation & Maintenance.
- Efficiency and Power Optimization.
- Water Treatment System Troubleshooting.
08
Steam Generation & Boiler Management
- Understanding Industrial Boiler Systems.
- Boiler Fundamentals & Working Principles.
- Types of Boilers & Industrial Applications.
- Boiler Selection, Sizing & Capacity Calculation.
- Boiler Components, Accessories & Mountings.
- Steam Generation, Distribution & Condensate Recovery.
- Boiler Efficiency, Energy Optimization & Cost Reduction.
- Boiler Operation, Start-up, Shutdown & Load Management.
- Boiler Maintenance & Troubleshooting.
- Boiler Safety, Controls & Automation.
09
AC & HVAC System
- Understanding AC & HVAC Systems.
- AC & HVAC Fundamentals & Working Principles.
- Types of Air Conditioning Systems & Industrial Applications.
- Refrigeration Cycle & Refrigerant Properties.
- Chiller Systems: Types & Applications.
- AC & HVAC Operation, Start-up & Shutdown Procedures.
- Preventive Maintenance & Troubleshooting.
- AC & HVAC Safety, Energy Efficiency & Cost Optimization.
10
Mastering Mechanical Installation & Maintenance
- Understanding Mechanical Systems & Industrial Equipment.
- Mechanical Engineering Fundamentals & Equipment Selection.
- Installation Planning, Layout & Foundation Requirements.
- Equipment Alignment, Levelling, Accuracy & Precision.
- Preventive, Predictive & Breakdown Maintenance.
- Mechanical Troubleshooting & Root Cause Analysis (RCA).
- Mechanical Equipment Safety, LOTO & Risk Assessment.
11
Mechanical Equipment Selection, Operation & Maintenance
- Bearings, Shafts, Couplings & Power Transmission Systems.
- Pipe & Piping Systems, Valves and Fittings.
- Lubrication Systems, Lubricant Selection & Condition Monitoring.
- Vibration Analysis, Thermography & Equipment Condition Monitoring.
- Hydraulic & Pneumatic Systems: Operation and Maintenance.
12
Pump & Pumping System Design, Selection, Operation & Maintenance
- Understanding Pump Fundamentals & Working Principles.
- Types of Pumps, Pump Components & Industrial Applications.
- Pump Capacity, Flow Rate, Head & Pressure Calculations.
- Pump Selection Based on System Requirements.
- Pump Performance Curves & Operating Characteristics.
- Total Dynamic Head (TDH) & System Curve Analysis.
- Net Positive Suction Head (NPSH) & Cavitation Prevention.
- Pump Sizing, Motor Selection & Power Consumption.
- Pump Installation, Alignment & Commissioning.
- Pump Operation, Monitoring & Performance Evaluation.
13
Energy Management & Cost Optimization
- Understanding Energy Management & Energy Auditing.
- Energy Consumption Analysis & KPI Monitoring.
- Boiler Efficiency Improvement & Cost Optimization.
- Air Compressor Leak Reduction and Cost Optimization.
- Chiller, AC & HVAC System Energy Optimization.
- Industrial Motor and Pump Efficiency & Cost Optimization.
- Electrical Energy Auditing, Load Analysis & Power Factor Improvement.
- Transformer, Generator & Power Distribution Loss Reduction.
- Energy Cost Analysis, Savings Calculation & Return on Investment (ROI).
14
Maintenance Management
- Understanding Industrial Maintenance Management & Its Objectives.
- Types of Maintenance: Reactive, Preventive, Predictive & Proactive.
- Maintenance Planning, Scheduling & Work Order Management.
- Maintenance Strategy Selection & Equipment Criticality Analysis.
- Failure Mode and Effects Analysis (FMEA).
- Cause & Effect (C&E) Matrix & Root Cause Analysis (RCA).
- MTBF, MTTR, Equipment Availability & Reliability Calculation.
- Overall Equipment Effectiveness (OEE) & Loss Analysis.
সার্টিফিকেট
Demo Certificate
কোর্স শেষে আপনি এই ধরনের সার্টিফিকেট পাবেন
শিডিউল
Class Schedule
📅
Class Starts১২ই নভেম্বর, ২০২৬ (তারিখ পরিবর্তনযোগ্য)
🕑
Class Timeশনি সোম ও মঙ্গলবার, রাত ৯:০০ - ১০:৩০
💬
Call / WhatsApp01796-825863
লিমিটেড অফার
এখনই এনরোল করুন
COURSE SPECIFICATION
৳ 6,250
৳ 12,500
৫০% সাশ্রয়
- Live + Recorded ক্লাস
- সার্টিফিকেট ইনক্লুডেড
- মেন্টর সাপোর্ট
পেমেন্ট মেথড
bKash / Nagad / Rocket এ পে করুন
কোর্স শেষে যা শিখবেন
COURSE OUTCOMES
01
INDUSTRIAL ENGINEERING FUNDAMENTALS
Clear Understanding about Industrial Engineering Fundamentals
02
ELECTRICAL INSTALLATION & MAINTENANCE
Perform Electrical Installation & Maintenance
03
MOTOR & INDUSTRIAL EQUIPMENT SELECTION
Select Motors & Industrial Equipment
04
ELECTRICAL LOAD CALCULATION & DESIGN
Perform Electrical Load Calculation & Design
05
SUBSTATION & POWER MANAGEMENT
Understand Substation & Power Management
06
MECHANICAL INSTALLATION & MAINTENANCE
Apply Mechanical Installation & Maintenance Techniques
07
PUMPING SYSTEMS & EQUIPMENT PERFORMANCE
Analyze Pumping Systems & Equipment Performance
08
ENERGY EFFICIENCY & COST REDUCTION
Improve Energy Efficiency & Reduce Operating Costs
09
MAINTENANCE MANAGEMENT & RELIABILITY
Implement Maintenance Management & Reliability Improvement
10
INDUSTRIAL SAFETY & RISK MANAGEMENT
Identify Industrial Hazards, Assess Risks and Apply Appropriate Safety Procedures
শিক্ষার্থীদের মতামত
LEARNER REVIEWS
আমাদের শিক্ষার্থীদের অভিজ্ঞতা ও রিভিউ
সাধারণ প্রশ্ন
Frequently Asked Questions
হ্যাঁ, একদম শুরু থেকে শেখানো হবে।
হ্যাঁ, কোর্স শেষে certificate দেওয়া হবে।
হ্যাঁ, Live + Recorded দুইটাই থাকবে।
৭-৮ সপ্তাহ
হ্যাঁ, সব ক্লাসের রেকর্ড পাবেন।
বিকাশ, নগদ, রকেট এর মাধ্যমে পেমেন্ট করতে পারবেন — উপরের Payment ফর্মে তথ্য দিয়ে সাবমিট করলেই WhatsApp এ মেসেজ চলে যাবে।